The Doors and rear end

Taking care of the small rust bubbles on the doors.

   

Cut out the rear section

Starting on the door.

Have to disassemble the window first.

Marked the rust

Stripped it down.

Nice and shinny.

To cut or not to cut.

Cut

There was a bit of rust on that bottom piece.

After grinding, cleaning and welding its all shinny now.

I had a shop fabricate me some pieces for the doors. I didn't have the tools to make a good 180 degree bend with an 20 gauge gap.

Now fitting the piece to the gap.

Fits pretty good.

Ready to weld, got the butt-weld clamps in.

<< Prev